PBM Battery Chargers
Seeking to honor the Lord Jesus Christ in all our business dealings since 1998
A Division of Lighthouse Enterprises
Email your questions if needed and please be patient
I am in the process of making YouTube videos to answer many of your questions
YOU MUST READ THIS BEFORE CONTROLLER FORM IS FILLED OUT!

Power Point - Single Phase
Charging Time 10-12 Hours

• Single-phase input voltage:208/240/480V AC – Frequency: 50/60 Hz.
• Transformer adjustments to ±5%V AC.
• Tropicalized stray-flux transformer, copper windings with double enamel
   insulation, class H, impregnated with non-toxic resins, kiln-dried.
• Transformer with UL recognized insulation system which ensures high
   reliability even in difficult operating conditions.
• Low voltage control circuit (24V AC).
• Overload cutout on transformer.
• Rectifier bridge equipped with interference suppressing filters.
• Protection fuses on mains input, and D.C. output.
• Final acceptance test conforming to safety regulations.
• Complete with charging cables and connector.
• Power cord to be installed by the customer.
• Electronic controller AP735USA with microprocessor and failure diagnostics
   powered from battery voltage.
• Polycarbonate plate with LED’s indicating the charging stages or faults, if any
• Lab-tested electronic circuit conforming to the EMC-Directive and CE marking.
• Charger switching off on battery disconnection while on charge.
• Short check of functions and times.
• 4 digit LCD with 12 multifunctional symbols

Power Point - Three Phase
Charging Time 10-12 Hours

• Three-phase input voltage: 208/240/480/600V AC – Frequency: 50/60 Hz.
• Transformer adjustments to ±5%V AC.
• Tropicalized stray-flux transformer, copper windings with double enamel
   insulation, class H, impregnated with non-toxic resins, kiln-dried.
• Transformer with UL recognized insulation system which ensures high
   reliability even in difficult operating conditions.
• Low voltage control circuit (24V AC).
• Overload cutout on transformer.
• Rectifier bridge equipped with interference suppressing filters.
• Protection fuses on mains input, and D.C. output.
• Final acceptance test conforming to safety regulations.
• Complete with charging cables and connector.
• Power cord to be installed by the customer.
• Electronic controller AP735USA with microprocessor and failure diagnostics
   powered from battery voltage.
• Polycarbonate plate with LED’s indicating the charging stages or faults, if any
• Lab-tested electronic circuit conforming to the EMC-Directive and CE marking.
• Charger switching off on battery disconnection while on charge.
• Short check of functions and times.
• 4 digit LCD with 12 multifunctional symbols

Power Point - Three Phase
Charging Time 7 - 8 Hours
Three Shift Charger

• Three-phase input voltage: 208/240/480/600V AC – Frequency: 50/60 Hz.
• Transformer adjustments to ±5%V AC.
• Tropicalized stray-flux transformer, copper windings with double enamel
   insulation, class H, impregnated with non-toxic resins, kiln-dried.
• Transformer with UL recognized insulation system which ensures high
   reliability even in difficult operating conditions.
• Low voltage control circuit (24V AC).
• Overload cutout on transformer.
• Rectifier bridge equipped with interference suppressing filters.
• Protection fuses on mains input, and D.C. output.
• Final acceptance test conforming to safety regulations.
• Complete with charging cables and connector.
• Power cord to be installed by the customer.
• Electronic controller AP735USA with microprocessor and failure diagnostics
   powered from battery voltage.
• Polycarbonate plate with LED’s indicating the charging stages or faults, if any
• Lab-tested electronic circuit conforming to the EMC-Directive and CE marking.
• Charger switching off on battery disconnection while on charge.
• Short check of functions and times.
• 4 digit LCD with 12 multifunctional symbols

Heavy Duty
Battery Charger

TL EQUALIZER UL

Charging Time 9-12 Hours

 

Simple and robust battery charger suitable for charging monoblocks and lead acid traction batteries. Suitable for floor washers and electric pallet trucks. Available with WA charging profile for
9 -12h recharge, 110 / 208 / 240VAC single phase. It is a reliable and simple product in use.

POKER UL

Advanced multi-cell Ferro charger excels in battery shop, rental and loaner-type installations.
For battery from 12V to 48V. 
Equipped with AC cable cord and DC cable output.